Perform differential expression analysis of miRNAs between conditions using DESeq2 or edgeR with small RNA-specific considerations. Use when identifying miRNAs that change between treatment groups, disease states, or developmental stages.
BY GPTomicsUPDATED Oct 27, 2026
INTENDED FOR✳Claude Code>_Codex◈OpenClaw↗CursorInstall in a listed agent.
instructions.md
---
name: bio-small-rna-seq-differential-mirna
description: Perform differential expression analysis of miRNAs between conditions using DESeq2 or edgeR with small RNA-specific considerations. Use when identifying miRNAs that change between treatment groups, disease states, or developmental stages.
tool_type: r
primary_tool: DESeq2
measurable_outcome: Execute skill workflow successfully with valid output within 15 minutes.
allowed-tools:
- read_file
- run_shell_command
---
<!--
# COPYRIGHT NOTICE
# This file is part of the "Universal Biomedical Skills" project.
# Copyright (c) 2026 MD BABU MIA, PhD <md.babu.mia@mssm.edu>
# All Rights Reserved.
#
# This code is proprietary and confidential.
# Unauthorized copying of this file, via any medium is strictly prohibited.
#
# Provenance: Authenticated by MD BABU MIA
-->
# Differential miRNA Expression
## Load miRNA Count Data
```r
library(DESeq2)
# Load miRge3 or miRDeep2 counts
counts <- read.csv('miR.Counts.csv', row.names = 1)
# Create sample metadata
coldata <- data.frame(
sample = colnames(counts),
condition = factor(c('control', 'control', 'treated', 'treated')),
row.names = colnames(counts)
)
```
## DESeq2 Analysis
```r
# Create DESeq2 dataset
dds <- DESeqDataSetFromMatrix(
countData = round(counts), # DESeq2 requires integers
colData = coldata,
design = ~ condition
)
# Filter low-expressed miRNAs
# miRNAs typically have fewer total counts than mRNAs
# Keep miRNAs with at least 10 reads across samples
keep <- rowSums(counts(dds)) >= 10
dds <- dds[keep, ]
# Run DESeq2
dds <- DESeq(dds)
# Get results
res <- results(dds, contrast = c('condition', 'treated', 'control'))
res <- res[order(res$padj), ]
```
## Apply Shrinkage for Effect Sizes
```r
# apeglm shrinkage for more accurate log2 fold changes
# Particularly important for low-count miRNAs
library(apeglm)
res_shrunk <- lfcShrink(
dds,
coef = 'condition_treated_vs_control',
type = 'apeglm'
)
```
## Filter Significant miRNAs
```r
# Standard thresholds for miRNA DE
# padj < 0.05: FDR-corrected significance
# |log2FC| > 1: 2-fold change minimum
sig <- subset(res_shrunk, padj < 0.05 & abs(log2FoldChange) > 1)
sig <- sig[order(sig$padj), ]
# Separate up and down-regulated
up <- subset(sig, log2FoldChange > 0)
down <- subset(sig, log2FoldChange < 0)
cat('Upregulated:', nrow(up), '\n')
cat('Downregulated:', nrow(down), '\n')
```
## edgeR Alternative
```r
library(edgeR)
# Create DGEList
dge <- DGEList(counts = counts, group = coldata$condition)
# Filter low expression
keep <- filterByExpr(dge)
dge <- dge[keep, , keep.lib.sizes = FALSE]
# Normalize
dge <- calcNormFactors(dge)
# Design matrix
design <- model.matrix(~ condition, data = coldata)
# Estimate dispersion
dge <- estimateDisp(dge, design)
# Fit model and test
fit <- glmQLFit(dge, design)
qlf <- glmQLFTest(fit, coef = 2)
# Get results
res_edger <- topTags(qlf, n = Inf)$table
```
## Visualization
```r
library(ggplot2)
library(EnhancedVolcano)
# Volcano plot
EnhancedVolcano(
res_shrunk,
lab = rownames(res_shrunk),
x = 'log2FoldChange',
y = 'padj',
pCutoff = 0.05,
FCcutoff = 1,
title = 'Differential miRNA Expression'
)
# MA plot
plotMA(res_shrunk, ylim = c(-4, 4))
```
## Heatmap of DE miRNAs
```r
library(pheatmap)
# Get normalized counts
vsd <- vst(dds, blind = FALSE)
# Select significant miRNAs
sig_mirnas <- rownames(sig)
mat <- assay(vsd)[sig_mirnas, ]
# Z-score scale rows
mat_scaled <- t(scale(t(mat)))
pheatmap(
mat_scaled,
annotation_col = coldata['condition'],
cluster_rows = TRUE,
cluster_cols = TRUE,
show_rownames = nrow(mat) < 50
)
```
## Export Results
```r
# Full results with normalized counts
res_df <- as.data.frame(res_shrunk)
res_df$miRNA <- rownames(res_df)
res_df$baseMean_norm <- rowMeans(counts(dds, normalized = TRUE)[rownames(res_df), ])
write.csv(res_df, 'DE_miRNAs_full.csv', row.names = FALSE)
# Significant only
write.csv(as.data.frame(sig), 'DE_miRNAs_significant.csv')
```
## Related Skills
- mirge3-analysis - Get miRNA counts
- mirdeep2-analysis - Alternative quantification
- target-prediction - Predict targets of DE miRNAs
- differential-expression/deseq2-basics - General DE analysis concepts
<!-- AUTHOR_SIGNATURE: 9a7f3c2e-MD-BABU-MIA-2026-MSSM-SECURE -->
---
name: bio-small-rna-seq-differential-mirna
description: Perform differential expression analysis of miRNAs between conditions using DESeq2 or edgeR with small RNA-specific considerations. Use when identifying miRNAs that change between treatment groups, disease states, or developmental stages.
tool_type: r
primary_tool: DESeq2
measurable_outcome: Execute skill workflow successfully with valid output within 15 minutes.
allowed-tools:
- read_file
- run_shell_command
---
<!--
# COPYRIGHT NOTICE
# This file is part of the "Universal Biomedical Skills" project.
# Copyright (c) 2026 MD BABU MIA, PhD <md.babu.mia@mssm.edu>
# All Rights Reserved.
#
# This code is proprietary and confidential.
# Unauthorized copying of this file, via any medium is strictly prohibited.
#
# Provenance: Authenticated by MD BABU MIA
-->
# Differential miRNA Expression
## Load miRNA Count Data
```r
library(DESeq2)
# Load miRge3 or miRDeep2 counts
counts <- read.csv('miR.Counts.csv', row.names = 1)
# Create sample metadata
coldata <- data.frame(
sample = colnames(counts),
condition = factor(c('control', 'control', 'treated', 'treated')),
row.names = colnames(counts)
)
```
## DESeq2 Analysis
```r
# Create DESeq2 dataset
dds <- DESeqDataSetFromMatrix(
countData = round(counts), # DESeq2 requires integers
colData = coldata,
design = ~ condition
)
# Filter low-expressed miRNAs
# miRNAs typically have fewer total counts than mRNAs
# Keep miRNAs with at least 10 reads across samples
keep <- rowSums(counts(dds)) >= 10
dds <- dds[keep, ]
# Run DESeq2
dds <- DESeq(dds)
# Get results
res <- results(dds, contrast = c('condition', 'treated', 'control'))
res <- res[order(res$padj), ]
```
## Apply Shrinkage for Effect Sizes
```r
# apeglm shrinkage for more accurate log2 fold changes
# Particularly important for low-count miRNAs
library(apeglm)
res_shrunk <- lfcShrink(
dds,
coef = 'condition_treated_vs_control',
type = 'apeglm'
)
```
## Filter Significant miRNAs
```r
# Standard thresholds for miRNA DE
# padj < 0.05: FDR-corrected significance
# |log2FC| > 1: 2-fold change minimum
sig <- subset(res_shrunk, padj < 0.05 & abs(log2FoldChange) > 1)
sig <- sig[order(sig$padj), ]
# Separate up and down-regulated
up <- subset(sig, log2FoldChange > 0)
down <- subset(sig, log2FoldChange < 0)
cat('Upregulated:', nrow(up), '\n')
cat('Downregulated:', nrow(down), '\n')
```
## edgeR Alternative
```r
library(edgeR)
# Create DGEList
dge <- DGEList(counts = counts, group = coldata$condition)
# Filter low expression
keep <- filterByExpr(dge)
dge <- dge[keep, , keep.lib.sizes = FALSE]
# Normalize
dge <- calcNormFactors(dge)
# Design matrix
design <- model.matrix(~ condition, data = coldata)
# Estimate dispersion
dge <- estimateDisp(dge, design)
# Fit model and test
fit <- glmQLFit(dge, design)
qlf <- glmQLFTest(fit, coef = 2)
# Get results
res_edger <- topTags(qlf, n = Inf)$table
```
## Visualization
```r
library(ggplot2)
library(EnhancedVolcano)
# Volcano plot
EnhancedVolcano(
res_shrunk,
lab = rownames(res_shrunk),
x = 'log2FoldChange',
y = 'padj',
pCutoff = 0.05,
FCcutoff = 1,
title = 'Differential miRNA Expression'
)
# MA plot
plotMA(res_shrunk, ylim = c(-4, 4))
```
## Heatmap of DE miRNAs
```r
library(pheatmap)
# Get normalized counts
vsd <- vst(dds, blind = FALSE)
# Select significant miRNAs
sig_mirnas <- rownames(sig)
mat <- assay(vsd)[sig_mirnas, ]
# Z-score scale rows
mat_scaled <- t(scale(t(mat)))
pheatmap(
mat_scaled,
annotation_col = coldata['condition'],
cluster_rows = TRUE,
cluster_cols = TRUE,
show_rownames = nrow(mat) < 50
)
```
## Export Results
```r
# Full results with normalized counts
res_df <- as.data.frame(res_shrunk)
res_df$miRNA <- rownames(res_df)
res_df$baseMean_norm <- rowMeans(counts(dds, normalized = TRUE)[rownames(res_df), ])
write.csv(res_df, 'DE_miRNAs_full.csv', row.names = FALSE)
# Significant only
write.csv(as.data.frame(sig), 'DE_miRNAs_significant.csv')
```
## Related Skills
- mirge3-analysis - Get miRNA counts
- mirdeep2-analysis - Alternative quantification
- target-prediction - Predict targets of DE miRNAs
- differential-expression/deseq2-basics - General DE analysis concepts
<!-- AUTHOR_SIGNATURE: 9a7f3c2e-MD-BABU-MIA-2026-MSSM-SECURE -->
COMPATIBILITY & REFERENCES
Platform guidance
Imported from the listed AgentSkill.sh category. Complete supplied package files and notices are retained. Required external tools and credentials are not installed. No bundled code was executed during import. Individual agent task behavior has not been tested.
---name: liquid-biopsy-analytics-agent description: AI-powered comprehensive liquid biopsy analysis integrating ctDNA, CTCs, exosomes, and cfRNA for cancer detection, monitoring, and treatment guidance. license: MIT metadata: author: AI Group version: "1.0.0" created: "2026-01-19" compatibility:
Remove batch effects from RNA-seq data using ComBat, ComBat-Seq, limma removeBatchEffect, and SVA for unknown batch variables. Use when correcting batch effects in expression data.
This skill should be used when working with genomic interval data (BED files) for machine learning tasks. Use for training region embeddings (Region2Vec, BEDspace), single-cell ATAC-seq analysis (scEmbed), building consensus peaks (universes), or any ML-based analysis of genomic regions. Applies ...
Generate reproducible bioinformatics/data-science Methods + run documentation from workflow run artifacts (Nextflow/Snakemake/CWL), including a top-of-doc workflow summary, exact executed commands, tool versions, parameters, QC, and outputs.